forum.dw-24.tv

может я такой тупой, но вы помогите с настройками...

до смены сервера все было отлично..

и сейчас все отлично

Еще раз прошу прощения:
[LOG000]2006/09/16 12:00:38 166 s version=0.8k-rc13m-re, system=mipsel-linux-uclibc, nice=-20
[LOG001]2006/09/16 12:00:38 166 s max. clients=30, client max. idle=120 sec
[LOG002]2006/09/16 12:00:38 166 s max. logsize=unlimited
[LOG003]2006/09/16 12:00:38 166 s client timeout=5 sec, cache delay=0 msec
[LOG004]2006/09/16 12:00:38 166 s shared memory initialized (size=167280, fd=3)
[LOG005]2006/09/16 12:00:38 166 s Cannot open file "/var/tmp/mycfg//mpcs.sid" (errno=2)
[LOG006]2006/09/16 12:00:38 166 s userdb reloaded: 0 accounts freed, 3 accounts loaded
[LOG007]2006/09/16 12:00:38 166 s signal handling initialized (type=sysv)
[LOG008]2006/09/16 12:00:38 166 s can't open file "/var/tmp/mycfg//mpcs.srvid" (err=2), no service-id's loaded
[LOG009]2006/09/16 12:00:38 166 s monitor: initialized (fd=7, port=988)
[LOG010]2006/09/16 12:00:38 166 s camd 3.3x: disabled
[LOG011]2006/09/16 12:00:38 166 s camd 3.5x: disabled
[LOG012]2006/09/16 12:00:38 166 s cs378x: disabled
[LOG013]2006/09/16 12:00:38 166 s newcamd: disabled
[LOG014]2006/09/16 12:00:38 166 s radegast: disabled
[LOG015]2006/09/16 12:00:38 166 s logger started (pid=167)
[LOG016]2006/09/16 12:00:38 166 s resolver started (pid=168, delay=30 sec)
[LOG017]2006/09/16 12:00:38 166 s serial: initialized (pid=169, auto@/dev/ttyS0)
[LOG018]2006/09/16 12:00:40 169 c01 Stop poll
[LOG019]2006/09/16 12:00:40 166 s client(2) connect from 10.131.99.7 (pid=170, pipfd=13)
[LOG020]2006/09/16 12:00:40 170 m02 plain monitor-client 10.131.99.7 granted (monitor, lvl=4)
[LOG021]2006/09/16 12:00:50 169 c01 Stop poll
[LOG022]2006/09/16 12:01:00 169 c01 Stop poll
[LOG023]2006/09/16 12:01:10 169 c01 Stop poll
[LOG024]2006/09/16 12:01:10 169 c01 too many errors, reiniting...
[LOG025]2006/09/16 12:01:20 169 c01 Stop poll
[LOG026]2006/09/16 12:01:30 169 c01 Stop poll
В какую сторону копать?

настройки покажите

ошибка компорта